When you have tile surfaces in your home such as flooring or walls, you are always looking for ways to keep your tile surfaces clean. While cleaning the tiles themselves can be challenging, cleaning the grout in between the tiles can be even more of a struggle. Part of the problem may be that you are using ordinary tile cleaner to try to remove stains and mildew from your grout as well. Instead, get to know some better solutions to your grout cleaning problems and get those tile surfaces thoroughly cleaned and sparkling. You will have pristine tile before you know it. 

Hydrogen Peroxide Grout Cleaning

One of the easiest ways to clean grout thoroughly and quickly is to use a basic household staple, hydrogen peroxide. All you need to do is pour the hydrogen peroxide directly onto your grout. Let the grout bubble and leave it be for about ten to twenty minutes. 

Then, use a small cleaning brush or a toothbrush and thoroughly scrub the tile grout. The residue and grime on your tile should scrub right off. All you need to do next is rinse with water and your will have sparkling clean grout right away. 

Bleach And Water Grout Cleaning

To use bleach to clean your tile grout, you will need to make sure you have a spray bottle handy. Fill the spray bottle with a half cup of bleach and about two to two and a half cups of bleach, and make sure the two get mixed thoroughly. 

Be sure to wear rubber gloves when you mix and use the bleach solution as bleach can be harsh and dangerous when it comes into direct contact with skin, especially when it is undiluted. If your grout is particularly grimy, spray a liberal amount of the bleach solution onto the grout and let it sit for fifteen minutes. Then scrub away the solution with a sponge or small brush. Rinse thoroughly after you are done scrubbing. 

Baking Soda And Vinegar Grout Cleaning

You can also clean your tile grout with basic products you likely already have in your kitchen. First, mix white distilled vinegar with water in equal parts. After you do so, add baking soda to the mixture. 

The ratio of baking soda to the vinegar and water mixture should be two parts baking soda for each single part of vinegar and water. This will form a thick paste that you can then rub into the grout between your tiles. Leave the mixture on your grout for ten to fifteen minutes and scrub it away to reveal your clean grout. 

If you use these helpful grout cleaning tips, you will have pristine and sparkling tile grout in no time. So, the next time you need to clean you tile surfaces, give these methods a try. If none of them work, it might be time to call professionals like All American Stone & Tile Care Inc.

Share