Keeping your home heated with a wood stove may require a little more than simply turning up your thermostat on a traditional HVAC system, but it's probably easier than you think. 

There are many misconceptions and superfluous information out there about how a home can be adequately heated with a wood stove. However, being aware of the following four factors should make it easier and less intimidating to keep your home comfortable during the wintertime with a wood stove. 

Too much firewood is always preferable to too little.

Initially, a lot of homeowners relying on a wood stove as a sole heat source waste time on complicated calculation for determining how much wood they'll need.

In the end, you'll always want to have too much available so you don't face the stress of worrying that you'll run out. When you're running your calculations, focus on the bare minimum and then make sure you're stocked up with a lot of extra. After all, you can always use any leftovers next winter if you have adequate storage facilities. 

A wood stove heating system really requires fans to work effectively.

You're not going to get as much as you could out of a wood stove if you don't have a fan system installed that will push the warm air throughout your whole home. Without fans, warm air will lie stagnant without circulating to cooler areas of your home. This means it will only be effective at heating the kitchen or the area right immediately surrounding the stove. 

Ideally, you should have a ceiling fan if you have cathedral ceilings in your home and also a stove-top fan that will get the warm air circulating throughout your kitchen, dining room, and living room areas. 

Insulation is very important if you're relying on wood stove heating.

If you're relying on a wood stove for heat, you definitely want to vamp up your isolation with features like double-paned windows and air spaces around doors. This way, you'll avoid air leaks that could compromise your system's efficiency and leave your home uncomfortably cool. 

You don't have to follow any strict rules when building a fire in your stove.

There's a lot of literature out there about how to properly light a fire in a wood stove. However, building a fire in your stove is really the simplest part of relying on a wood stove as a heating source.

You have the freedom to develop the best method for you when it comes to lighting a stove fire to heat your home. Wood stoves are all designed differently, so find the best way to get a fire going with the unique model you have. Usually it will require a combination of wood and more easily flammable materials like papers and cardboard to get things going. 

For more information, visit http://www.aquarec.com or a similar website.

Share